欧美性高清bbbbbbxxxxx-欧美性活一级视频-欧美性极品hd高清视频-欧美性精品-成人久久久久-成人久久久久久

Sealer of high-tech institutions

Source:   Date:2014-10-28 15:46:34   Views:

The main mechanism box sealer machine is mainly composed of a delivery box bodies, institutions and sealing demolition page institutions.
(1) Folding mechanism. Folding mechanism comprises two parts off a small page (Previous and post negative) agencies and institutions fold large pages. Fixed folding folding method (by the guide plate or guide bar) and the activities folding categories.
After folding the folding method using the activity, its agencies for the L-shaped pendulum 2. When the carton to a positioning, the drive rod cylinders 3 4 2 counterclockwise so that the pendulum swings, the back page depressed.
Fold a small page folding mechanism also double pendulum mechanism, twin contraction analysis page institutions, twin paper folding mechanism and other forms of support. Their structure is more complex,, before but can fold in a negative station will be equivalent to two small pages.
Fold large page agencies generally use a fixed guide rods or guide surfaces. Fold the upper and lower body split large pages pages fixed on the machine. When the carton by folding, a page is curved in the analysis of the role of the bottom two large pages folded, then enter the sealing station. (2) sealing mechanism. Depending on the method of sealing, sealing institutions stapling mechanism, the number of seals affixed adhesive agencies and institutions of the points.
Folding cartons coated on the number of bodies called glue adhesive mechanism. According to the type of adhesive and glue in different ways, and there are various types of glue. Currently used roll style with spray-two.
Roll applicator mechanism, mainly used to coat a few cold glue. When folded flattened 2 enters from right to left folding gluing station, rotating coating roll Jane 3. plastic storage tank I of adhesive tape and coated folding on the number 2. 4 adjustable scraper function is to scrape excess adhesive adheres drum 3.
Multi-coated hot melt adhesive spray applicator body. In order to make the molten hot melt adhesive (above 70t), located inside the heater 1. Hot melt adhesive glue is added after the second sealing male, heated and melted, and then the compressed air introduced by the duct 3, to force the molten hot melt adhesive, after the solenoid valve 5, 6 from the injection nozzle 7 in the folding.
To prevent nozzle clogging, you must choose a good heat stability and control the heating temperature hot melt adhesives, hot melt adhesives to avoid carbonation. Seal sealing machine seal number is affixed to folding corrugated carton sealing seams punishable study into the body. Glial band sealer. Common gum tape sealing machine works. When the tile Shui carton A right to left attached to the applicator station B, 4-sided adhesive tape is pulled out from the upper and lower paper tray, the wheel I reach the hot water tank 3, in the warm water effect, single-sided adhesive dissolved activation produce dry sex, under the pressure attached to the role of the applicator roller 5 seam in folding cartons. When the carton reaches station C, D, the two tape cutter 6 4 cut down by brush to paper tape on both ends are flat against the side of the carton and on.
Adhesive tape sealing machine. A coating of pressure sensitive adhesive used in the adhesive sealing tape with a simple apparatus than gum (no wet set). Generally advance the adhesive tape is pulled out a suitable length of the end portion, it will be firmly attached to the traveling of the carton seam. Such as traveling on carton sealing tape might be pulled, and then by pressure seal affixed to the wheel, and finally cut off by a cutting device.