欧美性高清bbbbbbxxxxx-欧美性活一级视频-欧美性极品hd高清视频-欧美性精品-成人久久久久-成人久久久久久

Sealing and Cutting Machine rack design steps

Source:   Date:2014-10-28 15:46:34   Views:

Sealing and Cutting Machine rack design steps are as follows:
(1) initially determined the shape and size of the sealing and cutting machine rack. According to the design criteria and general steps, initially to determine the shape and size of the sealer frame to ensure its internal and external parts can operate normally.
(2) According to the sealer frame manufacturing number, structure, shape and size, the initial development of the manufacturing process. For example sealer single piece of non-standard equipment racks, stands, can be welded instead of casting.
(3) Analysis of the load. Heavy load including equipment addresses sealer on the rack, the rack itself, sealing and cutting machine weight, equipment operation dynamic loads. For elevated agencies, but also consider the wind load, snow load, seismic load and so on.
(4) determine the form of the structure. For example the use of truss structure or board structure. In reference to the relevant information to determine the structure of the main parameters (ie, high, thickness and materials, etc.). (5) Draw the structure diagram. (6) Reference similar equipment related practices, procedures, determine the structure of the sealer frame allowed deflections and stresses.
(7) is calculated to determine the size.
(8) If necessary detailed calculations and model checking or doing experiments, and then modify the design to determine the final size.